HANGZHOU SIVGE MACHINERY CO., LTD
HANGZHOU SIVGE MACHINERY CO., LTD.
Add to Cart
Occasions suitable to use this machine:
Places may in need of this kind of machine:
Office buildings, shopping centers, theatres, hospitals, warehouses, factories, museums, auditoriums, hotels, gymnasium, business/convention center, airports, auto stations and highway toll station etc.
Using purpose:
Business decoration, ceiling/fixture works, industrial facilities maintenance, lamps and lanterns replacement in halls, maintenance of street lamp, aerial photographs and wall cleaning etc.
Product standard features
Drivable at full height
One hand proportional joystick
Drive speed interlock
Tilt level sensor with audible alarm
Overload limit
3 meter Outreach
360 degree platform rotation
Emergency stop buttons at both controls
Emergency lowering device in case of power supply failure
Battery charger indictor
Forklift pocket
Compact size with easy quick guardrail assemblage system
Low maintenance requirements will save you time and money.
Specification
7.5m self propelled aerial lift / Mast type Boom Lift with 3 meter outreach work
| Series | Z5108 |
| Model-code | GTHZ8-510870 |
| Platform height(m) | 7.5m |
| Working height(m) | 9.5m |
| Outreach | 3m |
| Platform rotation | 360° |
| Capacity(kg)/occupants | 200Kg/1 for indoor, 125Kg/1 for outdoor |
| Platform size(mm) | 750*720mm |
| Stowed length(mm) | 2700mm |
| Stowed width(mm) | 990mm |
| Stowed height(mm) | 1965mm |
| Machine weight(kg) | 1900Kg |
| Moving methods | Drivable when fully lifted up |
| Outside/inside turning radius | 1.9/0m |
| Travel speed(Stowed)(km/h) | 3.0Km/h |
| Travel speed (Lift)(km/h) | 0.8Km/h |
| Climb ability | 15% |
| Ground Clearance | 66mm |
| Wheelbase | 1445mm |
| Front wheel | Steering wheel 12inch |
| Rear wheel | Driving wheel 12inch |
| Power supply | DC 24V |
| Power input(kw) | 1.5kw |
| Battery | 4*12V/260Ah |
| Max. allowed wind speed | 12.5m/s for outdoor, 4.5m/s for indoor, |
| Rated oil pressure | ≤16MPa |
If the above specification can not fulfill your working site, such as machine length, width and height, please contact us for further design service.
